Our Daily Bread “Mr & Mrs.” Wedding
Card
Supplies:
Dies:
Our
Daily Bread Leaves & Branches
Our
Daily Bread Mr & Mrs
Our
Daily Bread Bitty Blossoms
Papers:
Paper
Cut White Metallic
Paper
Cut Gray Metallic
Cougar
White
Our
Daily Bread Wedding Paper Pack
Kaiser
Craft Pearls
Foam
Tape
2
Way Glue Chisel Pen
Dimensions:
3
Gray flowers
3
white flowers
3
gray leaves
2
branch leaves
3
Mr & Mrs white
1
Mr & Mrs Gray
1
– 2 ¼” x 5“ Top Wedding Paper
1
– 1 ¼ “ x 5” bottom of Wedding paper
1
– 1” x 5” middle of wedding paper
1
– 2 1/2 “ x 5 1/4” Gray Metallic Paper
1
– 1 ½” x 5 1/4” Gray Metallic Paper
Directions:
1.
Die cut all pieces.
2.
Fold card in half
3.
Mount Wedding paper onto the gray pieces they
match
4.
Using foam tape pop up the middle gray/wedding
paper
5.
Using foam tape pop up the gray oval, then
attach the white oval on top of gray oval
6.
Take Glue pen and start gluing the Mr & Mrs
white down and stack the other 2 white pieces on top of the first white piece,
then add the gray Mr and Mrs on top of the white pieces to make layered look
7.
Then add the white flower on top of the gray
flowers
8.
Attach the branches around the oval and put the
flowers on top with leaves.
9.
Pearls in middle of flowers.
Rainbow Stenciled card
Supplies:
Stamps:
Beautiful Inside by Altenew
Dies:
Everyday Sentiment Banners by Lawn Fawn
Inks:
Distress Oxide Inks: Candied Apple, Wild Honey & Peacock Feathers
Versamark
Paper:
Black card stock
Confetti card stock
White card stock
Stencil by Heidi Swapp
Spray bottle
Paper towels
Ink blending tools
Heat Tool
White Embossing powder
Dimensions:
Confetti card base: 5 1/2”x 8 1/4”
Black: 5 3/8” x 3 7/8” & die
cut banner
White: 5 1/4”x 3 3/4”
Directions:
1. Fold
confetti card base in half. Stamp the greeting onto the black banner strip
using Versamark ink and emboss with white embossing powder.
2. Add
Distress color using an ink blending tool in the following order from the right
hand side. Candied Apple, then Wild Honey, and then Peacock Feathers.
*Hint…apply red on 1/4, apply yellow on next 1/2, and blue over last half
overlapping the yellow to create a green strip.
3. Spray
water liberally onto the stencil. Lay the stencil over the inked paper and then
place a paper towel over that adding just a bit of pressure. Let sit for 2
minutes. Remove stencil and towel. Dry well and mount onto the black card stock
mat.
4. Add
greeting banner about 1” from the bottom right hand edge of card front.
Concord & 9th Thanks Card
Supplies:
Stamps:
Hello Lovely by Concord & 9th
Inks:
Espresso Truffle by Memento
Distress: Broken China, Gathered, Mustard Seed, Peeled Paint, Rusty
Hinge
Versamark
Paper:
Palo Verde by Bazzill
White
Blue
White embossing powder
Multi medium matte
Express-O Yourself Prills
Twine
Foam tape
Heat Tool
Dimensions:
Green card base: 8 1/2”x5 1/2”(4 1/4”x5 1/2” folded), 1 13/16”x 1/2”
Blue mat: 4”x 5 1/4”
White: 3 7/8”x 5 1/8”
Directions:
1. Fold
green card base in half. Mount blue mat on top of the card base.
2. Stamp
floral image onto white card stock using Espresso Truffle ink.
3. Add
color to the stamped floral image using Distress inks.
4. Add
prills to the large flower center using multi medium matte. Allow to dry.
5. Stamp
THANKS onto the green strip using Versamark ink. Emboss using white embossing
powder. Add foam tape to the back of green strip and mount flush with the right
hand side about 1 1/2” from bottom of white card stock piece.
6. Tie
the twine around the white stamped card stock piece and tie a bow near the
greeting.
7. Mount
the stamped white card stock piece onto the blue mat attached to the card base.
Center Step Card
Supplies:
Stamps:
Best Buds by Altenew * greeting, “Your friendship means everything to
me”
Dies:
Tall Pine by Memory Box
Ink:
Archival Hickory Smoke
Paper:
Cream center step card by The Paper Cut
Vintage Christmas #4 patterned paper by Authentique
Cream card stock
Hillary card stock by Bazzill
Foam tape
Red berry gloss Nuevo Crystal drops
Dimensions:
Patterned paper 1- 4 3/8” x 2 1/8” & 2- 7/8” x 4 3/8”
Die cut trees 1- green & 1- cream
Directions:
1. Stamp greeting on the bottom center front of the center step
card base using Hickory
Smoke
ink. *Hint…I used the Misti and stamped the greeting 2 or 3 times to get
desired look
2. Fold the center step card on the fold lines following the
guide on the packaging.
3. Add patterned papers onto the card front.
4. Adhere the green tree on top of the cream tree, slightly
offset. Mount tree onto center panel
of the
card front using foam tape.
5. Randomly add red drops as an accent on the strips to the left
and right of the trees.
Penny Black Autumn Hello Card
Supplies:
Stamps:
Hello Autumn by Penny Black
Dies:
Pinpoint Single Frame by Memory Box
Double Pierced Squares by Avery Elle
Inks:
Memento Tuxedo Black
Papers:
Solar White card stock
Raspberry card stock
Prisma color pencils: blender, aquamarine, peach, yellow ochre, sienna
brown, lime peel &
crimson red
Dimensions:
White card stock: 4 1/2”x 11”
Raspberry card stock: 1 5/8”x 1 5/8”
White pierced square (cut with die)
Directions:
1. Fold
the white card base in half and stamp the little girl on the front center using
black ink. *Hint…I cut the leaf apart from the image so that I could stamp it
multiple times over the front of the card.
2. Color
image using Prisma color pencils. Go over colored image with the blender
pencil. This helps make the coloring blend nicely.
3. Stamp
the greeting on the bottom center of the pierced white square using black ink.
Also stamp a leaf above the greeting and color.
4. Center
the frame die over the little girl image and cut out.
5. Add
foam tape behind the image and place back into the rectangle opening. Close the
card front and this will make for perfect placement of the center cut out
rectangle.
6. Mount
blue card stock behind the greeting square. Add foam tape and mount in the
lower left corner. * Hint…make sure you don't put foam tape where it overlaps
the stamped image.
Art Impressions “Nativity
Stamp: Art
Impressions “Nativity”
Taylored Expressions “Twinkle,
Twinkle”
Paper:
Watercolor cut 5.25 x 11
Ink:
Versafine
Onyx Black
Distress
Stains: Vintage Photo, Antique
Linen, Broken China, Fossilized Amber
Distress
Ink: Stormy Skys
Versamark
Embossing
Supplies:
Watercolor
Brush
Craft
Mat (optional)
Die
Cut Machine
Bone
folder (optional)
Masking
paper
Clear
embossing powder
Directions:
1.
Score the paper in thirds (approx. 3
5/8ths). With finger or bone folder press the fold
lines firmly
2.
Center, ink and stamp the large image on the
first panel (left outside). (Image
with Donkey) Cut out the opening
with the matching die.
3.
Fold over the right side and lightly trace the
opening in order to position
the lamb stamp Cut out the opening and trace the
opening onto the center panel.
This is the smallest image that will be stamped. (Baby).
4.
Be sure to erase all pencils lines and color the
images.
Vintage Photo: Donkey feet, fence, stable, manger, sheep
noses and ears
Antique linen: Animals, baby skin
Fossilzied Amber: all areas that are straw
Broken China: pillow and blanket
5.
Stamp the sentiment on the lower right front.
6.
Mask of the front image and stamp the Twinkle
Twinkle background with clear emboss.
Heat set and distress with Stormy Sky
Lustrous Flower Card
Supplies:
Penny Black Lustrous 40-545
Penny Black Happy Wishes 30-419
Ranger Distress Spray Stain – Fossilized Amber
Ranger Distress Inks: Rusty Hinge, Ripe Persimmon, Vintage
Photo, Ground Espresso
Royal Fiber Birch Cardstock – cut 4½ x 6½ʺ
Royal Sunflower Cardstock – cut 5 x 7ʺ
Taylored Expressions Chocolate Truffle Cardstock – cut 4 ⅝ x
6⅝ʺ
Tools: Mister, Paint brush or water brush, Heat Gun
Directions:
1. Place paper mask (opening 3 x 5ʺ) over light cardstock. Mist with diluted stain (½
stain + ½
water). Remove mask. Dry with heat gun
2. Ink PB Lustrous stamp with Rusty Hinge. Dab Vintage Photo
ink along stem, edges of leaves and tips of buds. Stamp on background.
3. Press Ripe Persimmon ink pad onto craft mat or tile. With wet paint brush, pick up ink and
apply to flowers, berries and buds.
Use wet paint brush (no ink) to blend ink on leaves.
4. Stamp verse with Ground Espresso ink.
5. Fasten to brown mat
6. Fasten to gold card
Stampers Anonymous Halftone and Rings
Stamps:
Stampers
Anonymous Halftone and Rings
Hero
Arts Birthday Set
Dies:
Avery
Elle “Happy”
Paper
White
4.25 x 11 for top fold. Score at
5.5
White
4 x 5.5
Strip
of white to cut the Happy die
2
Black ½ inch-1” x 5.5
Inks:
Distress
Oxide “Black Soot”
Versamark
embossing
Supplies:
Heat
embossing tool
Tweezers
(optional)
Embossing
duster
Embossing Powder:
Ranger-Yellow,
Lime Green, Orange and Red
White
embossing powder
1.
Apply the black strips to each side of the card
base.
2.
Ink with black soot the Halftone stamp and stamp
the 4 x 5.5 paper. Add this to the
card base.
3.
Cut the Happy out of white. Apply the Versamark embossing ink over
the whole word.
4.
Using the embossing powders add color to each
letter. Remember to tap off the
excess before adding the next color.
When all four colors have been applied heat set it. Laying the word happy once the
embossing powder has been added on scrap paper helps hold the letters in place
when heat setting the powder. Add
the Happy to the card base.
5.
White emboss the word Birthday on the black
strip and attach to the card place
Spellbinder
Interwined
Die:
Spellbinder Intertwined
Stamp: Altenew
Beautiful Inside Stamp Set
Stencil: Tim
Holtz Mini’s #30
Paper:
Royal
Base for base. Cut 9 x 6.5. Score at 4.5. Card when folded is 4.5 x 6.5.
Cut a piece 2
5/8 by 4 7/8 Cut a piece 2 x 3 to
die cut for the sentiment.
Bronze Stardream. Cut 4.5 x
6.5 Cut a piece 2.5 x 4.75
Copper Stardream. Cut 4.5 x 6.5
Foil. Cut a piece 3 x 6
Supplies:
Deco
Transfer gel
Deco
Foil
Pallet
knife (optional is to use a sponge dauber)
Adhesive
Laminator
Ink:
Memento
Rich Cocoa (alternate ink:
Espresso Truffle)
Directions:
1.
Fold the card base and mount the Bronze (brown) paper on it
2.
Begin heating the laminator and set it on .5mil
3.
Using the Spellbinder die cut the Copper paper
and add to the card base
4.
Add the Royal Base 2 5/8 by 4 7/8 to the center
of the die cut
5.
Lightly apply transfer gel to the Bronze 2.5 x
4.5 using and allow to dry to clear or tacky to the touch. This may take 10-15 minutes ( can
lightly blow dry it to speed it up towards the end)
6.
Lay
the Deco Foil over the transfer gel and place inside a paper or sleeve and run
through the laminator.
7.
Apply the Deco Foil paper to the Royal Base in
the center of the card.
8.
Using the small die from the set cut our of the
Royal Base and stamp with the sentiment in Rich Cocoa.
Our Daily Bread “Sympathy” Card
Supplies:
Dies:
Our
Daily Bread Vintage & Flourish Pattern
Our
Daily Bread With Sympathy
Our
Daily Bread Bitty Blossoms
Papers:
Classic
Crest Saw Grass (cream)
Photo
Play Wildflowers
Photo
Play Lakeside
Kaiser
Craft Pearls
2
Way Glue Chisel Pen
Ink:
Versafine Black
Dimensions:
3
Red flowers
1
Saw Grass flowers
4
green leaves (2 small, 2 larger)
1
green center die
1
saw grass smaller center die
1
large background die
1
large green background same size as die
Base
in saw grass (cream)
1
Red Sympathy
2
Saw Grass Sympathy
Directions:
1.
Die cut all pieces.
2.
Fold card in half
3.
Mount Green background under the large red Vintage
Die paper
4.
Using tape adhere to base card
5.
Using tape adhere the center green and center
Saw Grass (small) middle
6.
Take Glue pen and start gluing the Sympathy Saw
Grass (cream) down and stack the other 1 Saw Grass Sympathy piece top of the
first Saw Grass piece, then add the Red Sympathy on top of the Saw Grass pieces
to make layered look
7.
Then add the Red flowers around and attached the
Saw Grass flower on top of a red flower in the corner. Attach the leaves around the flowers.
8.
Pearls in middle of flowers.
No comments:
Post a Comment